/ Беспроводные сети Ruijie / RG-AP630(IDA2)

RG-AP630(IDA2)

Wi-Fi 5 Wave2 Outdoor Directional AP Outdoor Wireless Access Point Series

image-main

image-1

image-2

image-3

Описание

Ruijie RG-AP630 (IDA2) is Ruijie’s top-class 802.11ac Wave 2 wireless access points for next-gen high-speed wireless network applications.
The RG-AP630(IDA2) supports 2.533Gbps access rate. The RG-AP630(IDA2) takes full care of security, RF control, mobile access, QoS, seamless roaming and other Wi-Fi aspects. Teaming up with Ruijie RG-WS Wireless Controller Series, the APs offer Wi-Fi user data forwarding, advanced security and access control with ease.
The industrial-class AP enclosure (IP67 rated) can withstand extreme outdoor conditions and hence simplify device installation and maintenance. The RG-AP630(IDA2) is built-in with directional antenna An extensive collection of external antennas is also available to overcome various deployment challenges. The AP support automatic switching between the external and internal antennas.
Feature highlights of RG-AP630 Outdoor AP Series:
• 802.11ac/802.11ac wave2 Superior Wireless Performance
• Built-in Smart Antenna (optional External Antenna) & Lightning Arrester
• Outstanding Environmental Adaptability (IP67, -40-55°C)

Спецификация

Model

RG-AP630(IDA2)

Target Deployments

For big campus, wireless city, harbour, storage room, mine

Basic Specifications

Radio

Concurrent dual-radio dual-band

Protocol

802.11a/b/g/n/ac Wave2

Operating Bands

802.11b/g/n: 2.4GHz to 2.483GHz

802.11a/n/ac: 5.150GHz to 5.350GHz, 5.47GHz to 5.725GHz, 5.725GHz to 5.850GHz

(vary depending on countries)

Antenna

Built-in Directional Smart Antenna (support external/internal antenna switching)                     

Antenna Loba Orientation

Internal Directional:

Horizontal 60 degrees,Vertical 30 degrees

Antenna Gain

10dBi

Max Throughput

Build-in antenna model: 800Mbps@2.4G

1733Mbps@5G

2.533Gbps per AP;

External antenna model:

600Mbps@2.4G

1300Mbps@5G

1.9Gbps per AP

Spatial Streams

4

Modulation

OFDM: BPSK@6/9Mbps, QPSK@12/18Mbps

16-QAM@24Mbps, 64-QAM@48/54Mbps

DSSS: DBPSK@1Mbps, DQPSK@2Mbps

CCK@5.5/11Mbps,

MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM and 256QAM

Receiver Sensitivity

11b: -99dBm(1Mbps), -93dBm(5.5Mbps), -90dBm(11Mbps)

11a/g:-93dBm(6Mbps), -85dBm(24Mbps), -82dBm(36Mbps), - 77dBm(54Mbps)

11n:-92dBm@MCS0, -73dBm@MCS7, -92dBm@MCS8, -73dBm@MCS15

11ac HT20: -90dBm (MCS0) , -63dBm (MCS9)

11ac HT40: -85dBm(MCS0) , -60dBm (MCS9)

11ac HT80: -82dBm(MCS0) , -58dBm (MCS9)

Maximum Transmit Power

27dBm

Note: The transmit power is configurable to up to 15dBm in 1dBm steps. The actual transmit power depends on local laws and regulations.

Adjustable Power

1dBm

IP Rating

IP67

Ports

Service Port

One 10/100/1000Base-T Port(ETH1/PoE IN);One 10/100/1000Base-T Port(ETH2);

One 1000M SFP Port(Combo Port)

Management Port

1 Console Port(RJ45)

Power

Power Supply

PoE+ (802.3at)

Power Consumption

<25W

WLAN

Maximum clients per AP

Up to 512

SSID capacity

Up to 16 per radio

Up to 32 per AP

SSID hiding

Support

Configuring the authentication mode. Encryption mechanism and VLAN attributes for each SSID

Support

Remote Intelligent Perception Technology (RIPT)

Support

X-speed

Support

Intelligent  load balancing based on the number of users or traffic

Support

STA control

SSID/radio-based

Bandwidth control

STA/SSID/AP-based speed control

Preference for 5GHz (band select)

Support

Wireless position tracking

Support

Dynamic Frequency Selection(DFS)

Future Release Support

Security

PSK, Web, and 802.1x authentication

Support

Data encryption

WPA (TKIP) , WPA2 (AES), WPA-PSK, and WEP (64 or 128 bits)

QR code authentication

Support

SMS authentication

Support

PEAP authentication

Support

Data frame filtering

Whitelist, static/dynamic blacklist

User isolation

Support

Rogue AP detection and countermeasure

Support

Dynamic ACL assignment

Support

WAPI

Support

RADIUS

Support

CPU Protection Policy (CPP)

Support

Network Foundation Protection Policy (NFPP)

Support

Wireless Intrusion Detection System(WIDS)

Support

Wireless Intrusion Prevention System (WIPS)

Support

Routing

IPv4 address

Static IP address or DHCP reservation

IPv6 CAPWAP tunnel

Support

ICMPv6

Support

IPv6 address

Manual or automatic configuration

Multicast

Support

Management and Maintenance

Network management

SNMP v1/v2C/v3, Telnet, SSH, TFTP, and web management

Visualized wireless heat map analysis

Support

(need to integrate with SNC)

Real-time spectrum analysis

Support

(need to integrate with SNC)

Fault detection and alarm

Support

Cloud AC management

Support

Statistics and logs

Support

FAT/FIT switching

The AP working in FIT mode can switch to the FAT mode through the RG-WS wireless AC.

The AP working in FAT mode can switch to the FIT mode through a local console port or Telnet.

External Characteristics

Lock

Support

LED Indicators

Power status and WDS signal strength

Relevant Standard

Wi-Fi Alliance Certification

Support

Safety Standard

GB4943, , EN/IEC 60950-1, EN/IEC 60950-22

EMC Standard

GB9254-2008, EN301 489, EN55022

Health Standard

EN 50385,

Radio Standard

FCC Part15,EN300328, EN301893

Vibration Standard

GB/T 2423

Specifications

Dimensions (W x D x H) (mm)

276 × 246 × 90

Weight

<2.5kg

Work Environment

Temperature

Operating Temperature: -40°C to 65°C (heater module will be enabled at -15°C)

Storage Temperature: -40°C to 85°C

Humidity

Operating Humidity: 0% to 100% (non-condensing)

Storage Humidity: 0% to 100% (non-condensing)

Installation Mode

Wall/pole-mount installation

Информация для заказа

Model

Description

RG-AP630(IDA2)

Outdoor Wireless Access Point, IP67 rating, built-in directional smart antenna and lightning arrester, 4×4 MIMO, 4 spatial streams, support internal/external antenna switching, support concurrent 802.1 1a/b/g/n/ac and WAVE2, FAT/FIT mode, PoE+

(Installation Mount-Kit included, but PoE adaptor sold separately)

Optional Accessories

RG-S2910-24GT4SFP-UP-H

24 10/100/1000BASE-T ports for downlink and 4 Gigabit SFP ports (non-combo) for uplink. To support HPOE(Port1~4), POE+, POE, 1 console port

Optional External Antennas

RG-ANTx3-2400D

2.4GHz MIMO Outdoor Directional Antenna Kit, include:
15dBi panel antenna (1 set);
1-meter N-N coaxial cables (3 sets);
waterproof materials (1 set)

RG-ANTx3-5800D

5.8GHz MIMO Outdoor Directional Antenna Kit, include:
19dBi panel antenna (1 set);
1-meter N-N coaxial cables (3 sets);
waterproof materials (1 set)

RG-ANTx3-2400&5800(O)

2.4GHz & 5.8GHz MIMO Outdoor Omnidirectional Antenna Kit, include:
8dBi panel antenna (1 set);
1-meter N-N coaxial cables (6 sets);
waterproof materials (2 sets)