RG-N18000-X
RG-N18000-X DataCenter Core Switches
/ Коммутаторы Ruijie / RG-N18000-X
RG-N18000-X DataCenter Core Switches
Ruijie Newton 18000-X Switch Series (RG-N18000-X) is the next-generation high-performance core switches designed for cloud network, which tops the class with its zero-backplane design on the 100T switching platform. The RG-N18000-X Switch Series offers high-efficiency and high-stability switching services, and guarantees ten-year smooth network upgrades.
The RG-N18000-X Series deploys an advanced hardware architecture design and is one of the world’s leading core switches with the highest specifications. The series adopts the CLOS orthogonal switching architecture and offers a maximum switching capacity of up to 461T per chassis. The RG-N18000-X Series offers forwarding rates of up to 5400Mbps per slot and supports 576 100GE, 576 40GE, 2304 10GE full line rate ports by one chassis.
The RG-N18000-X Series adopts front-to-rear airflow design for heat dissipation which features a much higher heat dissipation efficiency with a much lower revolving speed, lower quantity of fans as well as lower noise level. The RG-N18000-X also makes use of energy-saving technology to minimize power consumption of the chassis.
The RG-N18000-X Series provides 2 models, RG-N18010-X and RG-N18018-X, to meet deployment needs of Internet data center and campus network data center.
Feature Highlights:
Model |
RG-N18018-X |
RG-N18010-X |
---|---|---|
Module Slots |
18 (2 for control engines) |
10 (2 for control engines) |
Modular Power Slots |
16 |
8 |
Control Engine Slots |
2 |
2 |
Service Module Slots |
16 |
8 |
Fabric Engine Slots |
6 |
6 |
Switching Capacity |
461Tbps/1032Tbps |
230Tbps/516Tbps |
Packet Forwarding Rate |
86400Mpps |
43200Mpps |
Airflow Design |
Front-to-rear airflow |
|
Device Virtualization |
VSU3.0 (Virtual Switch Unit) |
|
Network Virtualization |
VXLAN network bridge, VXLAN network gateway |
|
VXLAN |
VXLAN Layer 2 Bridge, VXLAN Layer 3 Bridge, EVPN VXLAN |
|
L2 Features |
Jumbo Frame, 802.1Q, STP, RSTP, MSTP, Super VLAN, GVRP, QinQ or flexible QinQ, LLDP |
|
IPv4 Features |
Static routing, RIP, OSPF, IS-IS, BGP4, VRRP, equal cost routing, strategic routing and GRE tunnel |
|
IPv6 Features |
Static routing, OSPFv3, BGP4+, IS-ISv6, MLDv1/v2, VRRPv3, equal-cost routing, strategic routing, manual tunnel, GRE tunnel |
|
ACL |
Standard/Extended/Expert ACL, IPv6 ACL |
|
QoS |
802.1p, Queue scheduling mechanisms (SP, WRR, DRR, SP+WRR, SP+DRR), RED/WRED, Input/output port-based speed limit, HQoS |
|
Reliability |
Independent fabric engine and independent control engine design to achieve the compete separation of forwarding and control panel Control engine 1+1 redundancy; fabric engine N+1 redundancy, power supply and fan N+M redundancy; zero-backplane design to avoid single point of failure; Hot-swappable components; Hot patch and online patch upgrade; ISSU; NSR; GR for OSPF/IS-IS/BGP, BFD for VRRP/OSPF/BGP4/ISIS/ISISv6/static routing |
|
Security |
NFPP (Network Foundation Protection Policy), CPP (CPU Protection), DAI, Port Security, IP Source Guard, uRPF, Portal authentication, user login authentication, Unknown multicasts are not delivered to CPU and support unknown unicasts suppression, Support SSHv2 to provide a secure and encrypted channel for user login |
|
Manageability |
Console/AUX Modem/Telnet/SSH2.0 command line configuration; FTP, TFTP, Xmodem, SFTP file upload/download management; SNMP V1/V2c/V3; Netconf, RMON; NTP clock; Fault alarm and auto-recovery; System log; Flow Analysis; Automated Configuration |
|
Dimensions |
442*1017*934(21U) |
442*1017*534(12U) |
Power Supply |
RG-PA2700I: 100-120VAC 1350W 200-240VAC 2700W |
|
MTBF |
>=200K hours |
|
Safety Standards |
IEC 60950-1, EN 60950-1 |
|
Emission Standards |
EN 300 386, EN 55032, EN 61000-3-2, EN 61000-3-3, EN 55024, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-8, EN 61000-4-11 |
|
Temperature |
Operating temperature: 0ºC to 45ºC |
|
Storage temperature: -40ºC to 70ºC |
||
Humidity |
Operating humidity: 10% to 90% RH (non-condensing) |
|
Storage humidity: 5% to 95% RH |
||
Operating Altitude |
-500m to 5,000m |
Model |
Description |
---|---|
XG-SFP-SR-MM850 |
10G SR Fiber Module for SFP+ ports, 300m |
XG-SFP-LR-SM1310 |
10G LR Fiber Module for SFP+ ports, 10km |
XG-SFP-ER-SM1550 |
10G ER Fiber Module for SFP+ ports, 40km |
XG-SFP-ZR-SM1550 |
10G ZR Fiber Module for SFP+ ports, 80km |
40G-QSFP-SR-MM850 |
40GBASE-SR, QSFP+ transceiver (8/12-core, 850nm, 100m with OM3 fiber, 150m with OM4 fiber, MPO) |
40G-QSFP-LR4-SM1310 |
40G LR single-mode fiber module, QSFP+ transceiver, 10km (LC, dual-core, 1310nm) |
100G-QSFP-SR-MM850 |
100GBASE-SR, QSFP28 transceiver (850nm, 100m with OM4 fiber) |
100G-QSFP-LR4-SM1310 |
100G LR single-mode fiber module, QSFP28 transceiver, 10km (LC, dual-core, 1310nm) |
100G-QSFP-iLR4-SM1310 |
100G iLR fiber module, QSFP28 transceiver, 2km (LC, dual-core, 1310nm) |
40G-AOC-5M |
40G QSFP+ Optical Stack Cable (included both side transceivers), 5 Meters |
100G-AOC-5M |
100G QSFP28 Optical Stack Cable (included both side transceivers), 5 Meters |
1、Main Chassis & Engine Management
Select the main chassis and control engine in accordance with specific product models.
Model |
Description |
---|---|
RG-N18000-X Series Main Chassis & Control Engine |
|
RG-N18018-X |
18-slot chassis with fan (without power supply) |
RG-N18010-X |
10-slot chassis with fan (without power supply) |
M18000X-CM II |
N18000-X 2nd generation control engine |
2、Power Supply
Please select at least 1 power module or up to N+M redundancy according to the power supply requirement of the device.
Model |
Description |
---|---|
RG-PA2700I |
N18000-X power module (support redundancy, AC, 2700W, 16A) |
3、Fabric Engine
Please select at least 1 fabric engine. It is recommended to select at least 2 to ensure fabric engine redundancy.
Model |
Description |
---|---|
M18018X-FE-C II |
N18018-X fabric engine II |
M18010X-FE-C I |
N18010-X fabric engine I |
4、Line Card & Service Module
Select the host line cards and service modules according to your application scenario.
Model |
Description |
---|---|
M18000X-6QXS6CQ-CB |
6 40GBASE-X ports(QSFP+,MPO),6 100GBASE-X ports (QSFP28, MPO) |
M18000X-36CQ-CB |
36 100GBASE-X ports (QSFP28, MPO) |
M18000X-12QXS12CQ-CB |
12 40GBASE-X ports(QSFP+,MPO),12 100GBASE-X ports (QSFP28, MPO) |
M18000X-48XS2CQ-CB |
48 10GBASE-X ports (SFP+, LC), 2 100GBASE-X ports (QSFP28, MPO) |
M18000X-18QXS18CQ-CB |
18 40GBASE-X ports(QSFP+,MPO),18 100GBASE-X ports (QSFP28, MPO) |
M18000X-48XT2CQ-CB |
48 10GBASE-T ports (RJ45),2 100GBASE-X ports (QSFP28, MPO) |
5、Transceiver & Accessories
Model |
Description |
---|---|
XG-SFP-SR-MM850 |
10G SR Fiber Module for SFP+ ports, 300m |
XG-SFP-LR-SM1310 |
10G LR Fiber Module for SFP+ ports, 10km |
XG-SFP-ER-SM1550 |
10G ER Fiber Module for SFP+ ports, 40km |
XG-SFP-ZR-SM1550 |
10G ZR Fiber Module for SFP+ ports, 80km |
40G-QSFP-SR-MM850 |
40GBASE-SR, QSFP+ transceiver (8/12-core, 850nm, 100m with OM3 fiber, 150m with OM4 fiber, MPO) |
40G-QSFP-LR4-SM1310 |
40G LR single-mode fiber module, QSFP+ transceiver, 10km (LC, dual-core, 1310nm) |
100G-QSFP-SR-MM850 |
100GBASE-SR, QSFP28 transceiver (850nm, 100m with OM4 fiber) |
100G-QSFP-LR4-SM1310 |
100G LR single-mode fiber module, QSFP28 transceiver, 10km (LC, dual-core, 1310nm) |
100G-QSFP-iLR4-SM1310 |
100G iLR fiber module, QSFP28 transceiver, 2km (LC, dual-core, 1310nm) |
40G-AOC-5M |
40G QSFP+ Optical Stack Cable (included both side transceivers), 5 Meters |
100G-AOC-5M |
100G QSFP28 Optical Stack Cable (included both side transceivers), 5 Meters |